D2S D2R LED BULBS MAGALL HID-LED 12000lm 6500K 70W XENON REPLACEMENTS

Brighter light than standard xenon

MAGALL D2S / D2R HID-LED bulbs emit intense 6500K light that improves visibility when driving at night and gives the headlamps a modern look.

The HID-LED design works with factory ballasts, so installation requires no wiring modifications.

✔️ 12000 lm per set

✔️ works with the original ballast

✔️ instant LED start

✔️ clear cut-off line

✔️ CANBUS

✔️ Plug & Play

⚙️Set of two ultra-bright LED bulbs

⚙️ System: 12V/24V

⚙️Voltage from the xenon ballast: 85V AC

⚙️Power: 70W (pair)

⚙️Luminous flux: 12000LM (pair)

⚙️Colour: 6500K cool white

⚙️Compatible with xenon sockets: D2S, D2R

⚙️ LED chip: 7741 CSP

⚙️2 LED chips with 30 light units per bulb

⚙️Quiet cooling fan with ball bearing (12,000 rpm)

⚙️ CANBUS

⚙️Made of aluminium and copper

⚙️Operating temperature:  -40~80℃

PLUG & PLAY

Plug & Play – quick installation with no modifications

MAGALL D2S / D2R HID-LED bulbs are designed to the 1:1 standard, so they work with factory sockets and xenon ballasts.

✔️ installation with no wiring modifications

✔️ works with the original ballast

✔️ quick 1:1 replacement

✔️ compatible with D2S and D2R sockets

They are installed using the factory plugs, with no need for extra adapters.

Active cooling for stable operation

A quiet ball-bearing fan helps dissipate heat effectively and maintain a stable operating temperature.

✔️ efficient cooling

✔️ quiet operation

✔️ longer LED life

✔️ stable light output

Built for tough conditions – IP65 rating

MAGALL HID-LED bulbs have an IP65 rating, which helps protect them against moisture, dust and water.

✔️ resistant to rain and mud

✔️ stable operation in harsh conditions

✔️ protected against moisture and dust

✔️ reliable all year round

CANBUS

CANBUS system – fewer on-board computer errors

The built-in CANBUS system helps reduce "bulb out" messages in many modern cars with factory xenon headlights.

✔️ stable operation after installation

✔️ fewer computer errors

✔️ no extra modifications needed

✔️ works with the OEM wiring

Strong 6500K light and fast LED response

Modern 7741 CSP LEDs emit bright, even 6500K light that makes night driving more comfortable and improves road visibility.

✔️ 12000 lm per set

✔️ instant LED start

✔️ modern white light colour

✔️ even road illumination

✔️ higher efficiency than standard xenon

IMPORTANT INFORMATION

Important information about use

Modern LED bulbs generate heat during operation – this is a natural feature of efficient LEDs and shows the product is working correctly.

Active cooling and the aluminium construction help remove heat effectively and protect the components from overheating.

For your safety:

✔️ do not touch the bulbs while they are on

✔️ wait a moment for them to cool down before removing them

✔️ install them with the vehicle lights switched off

⭐MAGALL LED Bulbs – Safety and Compliance with EU Standards⭐

MAGALL LED bulbs comply with the EMC Directive 2014/30/EU and have passed EN IEC 55015:2019+A11:2020 testing.

MAGALL bulbs are designed not to interfere with other electrical devices and are resistant to external electromagnetic interference. This means stable, trouble-free operation throughout their service life, adding to the convenience, safety and comfort of everyday use of MAGALL LED lighting.

MAGALL LED bulbs carry the CE mark and meet European Union requirements for safety, health and environmental protection. The CE mark shows that the products have been tested for safe use and meet the strict quality and technical standards required in the EU.

☝️Are LED bulbs type-approved (homologated)?

All LED light sources available on the market were designed for headlights that meet the standards for halogen or conventional bulbs. The European Union has not yet adopted the comprehensive regulations needed to legalise LED retrofit light sources. When some sellers present information in their listings suggesting that LED bulbs are type-approved, this is intended to mislead customers into buying. Some of them even put an E… mark on the product to reinforce this impression. We do not use such practices.

In the European Union, automotive products must have UNECE certification to be used on public roads. Existing ECE certificates cover only halogen and xenon bulbs and LED light sources fitted as original equipment in new vehicles. However, there are no specific type-approval requirements or restrictions on using LED light sources on private roads, race tracks, etc. That is why leading manufacturers of automotive LED lighting mark their products "off-road use only" or "not for use on public roads".

Although the law has not changed, we believe our customers now know enough about LED light sources to make an informed choice and a satisfying purchase.

All our products comply with the EMC Directive 2014/30/EU – CE

and are tested to EN IEC 55015:2019+A11:2020 and EN 61547:2009

CANBUS – how it works and why it matters for LED bulbs

CAN BUS (Controller Area Network Bus) is a car's internal communication network that lets electronic modules (e.g. the BCM – Body Control Module) exchange data without extra wiring.

The computer does not check whether the bulb actually lights up – it measures the current draw and the circuit resistance.

• Test when the ignition is switched on: the computer sends a short pulse and checks whether the resistance falls within the so-called acceptance window, i.e. the permitted range of values.
• Continuous measurement while driving: in more advanced cars the BCM constantly monitors the current. If the LED bulb has different characteristics from a halogen (e.g. lower current draw), the system may treat this as a fault and display a "bulb out" message.

In practice, different cars have different tolerance ranges and CANBUS standards – they differ in data transfer speed, how the circuit is tested, and resistance and power draw requirements.

So saying that an LED bulb "has CANBUS" or "doesn't have CANBUS" is a simplification. It all depends on the tolerance of the vehicle's diagnostic system and the parameters of the LED bulb itself.

An illustrative example of how it works:

an H7 halogen bulb has a resistance of 3,6Ω

1.

• an example H7 LED bulb has a resistance of 10 Ω
• car A (acceptable range) 2,5–7 Ω – warning
• car B (acceptable range) 2–12 Ω – no warning
• car C (acceptable range) 3–5 Ω – warning

2.

• an example H7 LED bulb has a resistance of 6 Ω
• car A (acceptable range) 2,5–7 Ω – no warning
• car B (acceptable range) 2–12 Ω – no warning
• car C (acceptable range) 3–5 Ω – warning

3.

• an example H7 LED bulb has a resistance of 2,5 Ω
• car A (acceptable range) 2,5–7 Ω – no warning
• car B (acceptable range) 2–12 Ω – no warning
• car C (acceptable range) 3–5 Ω – warning (short circuit)

Now you know why the same bulbs work without warnings for some users while for others the on-board computer reports a problem.

In our listings we state the technical parameters preciselyto make it easier to choose bulbs for a specific car model and avoid misunderstandings.