HB3 LED BULBS RETROFIT 1:1 BRIGHT WHITE LIGHT

HB3 LED BULBS CANBUS 1:1 BRIGHT WHITE LIGHT

LATEST FATEEYE MODEL: F11 SERIES

IMPRESSIVE LUMINOUS FLUX

PERFECT FIT

✅ FateEye bulbs are designed as perfect replacements for halogen bulbs, which means they can be easily installed without modifying the headlamps. Their identical size means they fit projector and reflector headlamps wherever halogen bulbs were used, so they can be installed where larger LED replacements do not fit

✅The new bulb model has been designed and sized to solve all the usual problems with installation, modifications, unsealed fogging headlamps, cutting the housing and adapters

• 20,000LM: A bulb with an impressive luminous flux that provides bright, clear illumination.
• 70W: low energy consumption, which means savings in the long run.
• 12V: compatible with the vehicle's electrical system, making installation and use easy.
• CANBUS: A special system that eliminates error messages from the car's on-board diagnostic systems.
• P20d: a standard base type widely used in car headlights, making replacement easy.
• 50,000h: Long lifespan, which means less frequent bulb replacement.
• 6,500K: Light colour close to daylight, giving better visibility and contrast on the road

✅The aluminium housing and active electronic heat sink with a turbo fan provide effective cooling of the LED bulbs. This gives them high performance and resistance to overheating.

✅Excellent cooling and stability: Thanks to the copper cooling core and two-stage cooling system, our bulbs maintain an optimal operating temperature. This ensures not only a long lifespan but also stable operation, even in difficult conditions

✅Do the 1:1 bulbs have CANBUS?

Our LED car bulbs contain an electronic emulator and a capacitor that work with most CANBUS diagnostic systems used in modern vehicles. This helps avoid "bulb out" warnings on the dashboard in brands such as MERCEDES, BMW, FORD, TOYOTA, MAZDA, MITSUBISHI, HYUNDAI, HONDA, NISSAN, CHEVROLET, CHRYSLER and many others. In some vehicles a temporary warning may appear before the engine is started during the diagnostic test, but it usually disappears once the car is running.

Please bear in mind that different car models may use different CANBUS standards, which differ in data transfer speed and in resistance and power draw requirements. Systems in VAG group cars (AUDI, VOLKSWAGEN, SKODA, SEAT) as well as VOLVO and OPEL are particularly strict. In these vehicles the diagnostics may require specific resistance values, which can result in bulb failure warnings.

In some cases, such as Volkswagen cars, the warning can be permanently disabled using special software (e.g. VCDS). Alternatively, additional resistors can be fitted, but installing them requires technical knowledge and care, as they can heat up to high temperatures.

In summary:

• In some vehicles it is enough to close the electrical circuit.
• Other cars are compatible with the emulator and capacitor.
• Certain models require additional resistors to match the parameters of halogen bulbs.

If the LED bulbs you bought cause compatibility problems, please send the product back using the returns system. Returns are simple and hassle-free, and we are happy to help if needed.

You may also consider larger LED bulbs with different parameters. Such bulbs are not limited by size, so they can use solutions that eliminate the warning 100%. Their current characteristics mirror those of a halogen bulb. These bulbs are recommended only for cars whose headlights can take bulbs of the stated dimensions. Check the free space inside the headlight to ensure adequate cooling. We also recommend avoiding adapters to ensure the bulb works correctly. This means they are intended for headlights where the bulb is inserted directly into the headlight, secured with a clip (spring), and the power plug is connected last. Please take a look at our full range.

✅EMC eliminates FM and CB radio interference, so you get clear reception of your favourite music and trouble-free communication while driving

✅Advanced 7035 LED chips with increased power and improved lifespan. Thanks to them, our bulbs provide strong and long-lasting light

✅Saves time and money: Our LED bulbs have a long lifespan, which means they will work for many years without frequent replacement. This saves you time and money on buying new bulbs

✅Safety and visibility on the road: Thanks to the high light output of our bulbs, you get better visibility on the road, which improves safety when driving in all conditions.

✅No shadows in the light pattern: Our bulbs provide even, shadow-free illumination. The cut-off line is precisely set, which improves visibility and driving conditions

✅Higher light output: The light output of our set is over ten percent higher than a XENON set and several times stronger than a traditional halogen set. You can be sure of strong, bright light

✅Better visibility on the road: Eliminating the problem of fogging and unsealed headlamps means full visibility on the road. The bulbs light the space ahead of you evenly, so you can see obstacles and other vehicles in good time and clearly. This makes your driving safer and protects you and other road users

✅Exceptional light performance: Thanks to high-power LEDs placed precisely close to the focal point, the set provides a clear, sharply defined cut-off line. You get excellent road visibility and better perception of your surroundings

"CHANGE THE IMPOSSIBLE" – that was the original idea behind FATEEYE

After graduating, I started working at a car company, and my colleagues and I often used one of the company jeeps to drive around at weekends for fun. One Saturday night, driving along a country road as usual, we almost hit a wild cat crossing the road.

We found that our headlights were not bright enough and did not reach far enough. It almost led to a serious accident.

Back at the company we tested many brands of headlights and found that almost none of them were bright enough. We realised there must be many people with the same problem as us, but no better product to choose from.

So we came up with an idea —— why not try to create high-quality LED headlights that meet the needs of night driving ourselves?

We started studying the structure and principles of car headlights, trying to solve the problems caused by product defects. Our plan was very simple: combine sensible design with reliable materials. We started looking for professional engineers and visiting well-known material suppliers in the industry...

A few months later our first product successfully came off the assembly line at the company's factory – after testing more than a dozen solutions and damaging more than a dozen samples.

We sent the product to many professional car parts shops, and the feedback we received was that it was an amazing product, not only in quality but also in price – we had done what most people thought was impossible

Today FATEEYE has developed a range of lighting products with proven design and manufacturing capabilities, exporting to dozens of countries. Moreover, our philosophy has never changed - to deliver reliable, high-quality and practical products.

HB3 LED Retrofit 1:1 bulbs — a replacement with no modifications. Bright white light for low and high beam. HB3 LED retrofit one-to-one 1:1 white car bulb for low and high beam.