W5W T10 LED BULBS POSITION RED MAGALL LONGLIFE 300LM 12V

W5W T10 LED BULBS POSITION RED MAGALL LONGLIFE 300LM 12V

Looking for modern W5W LED bulbs for position lights?

Choose LED MAGALL LONGLIFE, which emit intense red light, giving a clear light effect and a neat look to the vehicle's rear lights.

It is durable lighting LED for your car, created for drivers who value quality, a modern look and reliable everyday operation.

⚙️TECHNICAL SPECIFICATIONS – MAGALL W5W LED BULB⚙️:

• Fitting: W5W T10
• Base type: W2.1x9.5d
• Supply: 12V
• Power: 1.4 W
• Current draw: 0.1 A
• Luminous flux: 300 lm
• Light colour: red
• LED type: 6SMD 3030
• Length: 24 mm
• Width (heat sink): 11 mm
• Base diameter: 10 mm
• Material: 6063 aviation aluminium
• Operating temperature: -40°C to +80°C
• Water resistance: IP65
• Canbus: NONE!

✅Trouble-free installation – 1:1 replacement

The MAGALL W5W LED bulb has exactly the same dimensions as a classic halogen W5W bulb – length 24 mm, width 11 mm, base diameter 10 mm.

It fits any W5W / W5W T10 socket – just take out the old bulb and put in the new one.

✅Strong, even light – better visibility and style

MAGALL W5W LED bulbs with 6SMD 3030 LEDs emit intense light with a brightness of 300 lm.

The ideal W5W LED position bulb.

W5W LED T10 guarantees clear red light and a neat look for your vehicle.

✅Important product information – benefits and safety rules

1. Operating temperature – modern and controlled Our LED bulbs reach a temperature of about 100°C during operation. This is a normal, fully controlled design feature that shows they are working correctly and efficiently.

2. Safety for your car – a key advantage over tradition Unlike our LEDs, traditional halogen car bulbs generate extreme heat. The temperature of their glass bulb reaches 200°C to as much as 250°C! Thanks to a much lower operating temperature, our LED bulbs are 100% safe for factory lamps and headlights. There is no risk of damage, clouding or melting, a common problem with overheating halogens.

3. Warning – your safety during installation Remember that even 100°C can cause burns. Always avoid touching the bulb while it is on and immediately after switching it off. Before fitting or removing it, wait a few moments to be sure it has cooled down completely.

✅IP65 water resistance – ready for any weather

The MAGALL W5W LED MAGALL is designed to work in all conditions. It performs perfectly – no worries about failure in rain, snow or mud.

Resistant to water, mud and dust – works well in places exposed to moisture.

✅Low energy consumption = savings

Just 1.4 W and 0.1 A – MAGALL W5W LED bulbs are gentle on your battery and electrical system.

✅APPLICATIONS:

• rear position lights – red parking/position light at the rear of the vehicle
• rear parking lights – in cars with a W5W/T10 holder
• red marker lights – rear or side-rear markers, if the vehicle has a W5W/T10 socket

✅Efficient cooling = longer life and reliable operation

Every MAGALL W5W LED bulb is designed for long, stable operation.

The solid housing made of 6063 aviation aluminium is not just structural – above all it acts as a heat sink , effectively drawing heat away from inside the bulb.

This keeps the operating temperature at a safe level, which:

• prevents the LEDs from overheating,
• eliminates the risk of damage to the electronics,
• extends the life of the W5W LED bulb several times over compared with cheap replacements,

⭐MAGALL LED Bulbs – Safety and Compliance with EU Standards⭐

MAGALL LED bulbs comply with the EMC Directive 2014/30/EU and have passed EN IEC 55015:2019+A11:2020 testing.

MAGALL bulbs are designed not to interfere with other electrical devices and are resistant to external electromagnetic interference. This means stable, trouble-free operation throughout their service life, adding to the convenience, safety and comfort of everyday use of MAGALL LED lighting.

MAGALL LED bulbs carry the CE mark and meet European Union requirements for safety, health and environmental protection. The CE mark shows that the products have been tested for safe use and meet the strict quality and technical standards required in the EU.

Are LED bulbs type-approved (homologated)?

All LED light sources available on the market were designed for headlights that meet the standards for halogen or conventional bulbs. The European Union has not yet adopted the comprehensive regulations needed to legalise LED retrofit light sources. When some sellers present information in their listings suggesting that LED bulbs are type-approved, this is intended to mislead customers into buying. Some of them even put an E… mark on the product to reinforce this impression. We do not use such practices.

In the European Union, automotive products must have UNECE certification to be used on public roads. Existing ECE certificates cover only halogen and xenon bulbs and LED light sources fitted as original equipment in new vehicles. However, there are no specific type-approval requirements or restrictions on using LED light sources on private roads, race tracks, etc. That is why leading manufacturers of automotive LED lighting mark their products "off-road use only" or "not for use on public roads".

Although the law has not changed, we believe our customers now know enough about LED light sources to make an informed choice and a satisfying purchase.

All our products comply with the EMC Directive 2014/30/EU – CE

and are tested to EN IEC 55015:2019+A11:2020 and EN 61547:2009

CANBUS – how it works and why it matters for LED bulbs

CAN BUS (Controller Area Network Bus) is a car's internal communication network that lets electronic modules (e.g. the BCM – Body Control Module) exchange data without extra wiring.

The computer does not check whether the bulb actually lights up – it measures the current draw and the circuit resistance.

• Test when the ignition is switched on: the computer sends a short pulse and checks whether the resistance falls within the so-called acceptance window, i.e. the permitted range of values.
• Continuous measurement while driving: in more advanced cars the BCM constantly monitors the current. If the LED bulb has different characteristics from a halogen (e.g. lower current draw), the system may treat this as a fault and display a "bulb out" message.

In practice, different cars have different tolerance ranges and CANBUS standards – they differ in data transfer speed, how the circuit is tested, and resistance and power draw requirements.

So saying that an LED bulb "has CANBUS" or "doesn't have CANBUS" is a simplification. It all depends on the tolerance of the vehicle's diagnostic system and the parameters of the LED bulb itself.

An illustrative example of how it works:

an H7 halogen bulb has a resistance of 3,6Ω

1.

• an example H7 LED bulb has a resistance of 10 Ω
• car A (acceptable range) 2,5–7 Ω – warning
• car B (acceptable range) 2–12 Ω – no warning
• car C (acceptable range) 3–5 Ω – warning

2.

• an example H7 LED bulb has a resistance of 6 Ω
• car A (acceptable range) 2,5–7 Ω – no warning
• car B (acceptable range) 2–12 Ω – no warning
• car C (acceptable range) 3–5 Ω – warning

3.

• an example H7 LED bulb has a resistance of 2,5 Ω
• car A (acceptable range) 2,5–7 Ω – no warning
• car B (acceptable range) 2–12 Ω – no warning
• car C (acceptable range) 3–5 Ω – warning (short circuit)

Now you know why the same bulbs work without warnings for some users while for others the on-board computer reports a problem.

In our listings we state the technical parameters preciselyto make it easier to choose bulbs for a specific car model and avoid misunderstandings.